Coordination cages integrated into swelling poly(ionic liquid)s for guest encapsulation and separation.

Coordination cages have been widely reported to bind a variety of guests, which are useful for chemical separation. Although the use of cages in the solid state benefits the recycling, the flexibility, dynamicity, and metal-ligand bond reversibility of solid-state cages are poor, preventing efficient guest encapsulation. Here we report a type of coordination cage-integrated solid materials that can be swelled into gel in water. The material is prepared through incorporation of an anionic FeII4L6 cage as the counterion of a cationic poly(ionic liquid) (MOC@PIL). The immobilized cages within MOC@PILs have been found to greatly affect the swelling ability of MOC@PILs and thus the mechanical properties. Importantly, upon swelling, the uptake of water provides an ideal microenvironment within the gels for the immobilized cages to dynamically move and flex that leads to excellent solution-level guest binding performances. This concept has enabled the use of MOC@PILs as efficient adsorbents for the removal of pollutants from water and for the purification of toluene and cyclohexane. Importantly, MOC@PILs can be regenerated through a deswelling strategy along with the recycling of the extracted guests.

Photo-thermal coupling to enhance CO2 hydrogenation toward CH4 over Ru/MnO/Mn3O4.

Upcycling of CO2 into fuels by virtually unlimited solar energy provides an ultimate solution for addressing the substantial challenges of energy crisis and climate change. In this work, we report an efficient nanostructured Ru/MnOx catalyst composed of well-defined Ru/MnO/Mn3O4 for photo-thermal catalytic CO2 hydrogenation to CH4, which is the result of a combination of external heating and irradiation. Remarkably, under relatively mild conditions of 200 °C, a considerable CH4 production rate of 166.7 mmol g-1 h-1 was achieved with a superior selectivity of 99.5% at CO2 conversion of 66.8%. The correlative spectroscopic and theoretical investigations suggest that the yield of CH4 is enhanced by coordinating photon energy with thermal energy to reduce the activation energy of reaction and promote formation of key intermediate COOH* species over the catalyst. This work opens up a new strategy for CO2 hydrogenation toward CH4.

Cooperation of Different Active Sites to Promote CO2 Electroreduction to Multi-carbon Products at Ampere-Level.

Electroreduction of CO2 to C2+ products provides a promising strategy for reaching the goal of carbon neutrality. However, achieving high selectivity of C2+ products at high current density remains a challenge. In this work, we designed and prepared a multi-sites catalyst, in which Pd was atomically dispersed in Cu (Pd-Cu). It was found that the Pd-Cu catalyst had excellent performance for producing C2+ products from CO2 electroreduction. The Faradaic efficiency (FE) of C2+ products could be maintained at approximately 80.8 %, even at a high current density of 0.8 A cm-2 for at least 20 hours. In addition, the FE of C2+ products was above 70 % at 1.4 A cm-2. Experiments and density functional theory (DFT) calculations revealed that the catalyst had three distinct catalytic sites. These three active sites allowed for efficient conversion of CO2, water dissociation, and CO conversion, ultimately leading to high yields of C2+ products.

Allograft Model of Aortic Arch Segment Grafting to Abdominal Aorta Through End-to-Side Anastomosis in Mice.

The mouse aortic transplantation model is a valuable tool for investigating the mechanisms of atherosclerosis regression, but few laboratories can generate it due to the operation difficulty, especially for the style of end-to-side anastomosis, which facilitates syngeneic heterotopic transplanting a plaque-rich aortic arch into the abdominal aorta. Here we provide a modified protocol for generating this allograft model, which is capable of overcoming several critical surgical challenges such as separating a longer abdominal aorta segment, reducing bleeding and thrombosis, optimizing aortotomy, and improving end-to-side anastomosis to guarantee a potent graft. By transplanting plaque-rich aortic arches into the abdominal aorta of wildtype mice, a high operation success rate (over 90%) was noted with aortic clamping time under 60 min, the graft potency was satisfactory evidenced by examinations of micro-CT, ultrasound, and lower limb blood flow measurement, while a significant atherosclerosis regression was observed in the grafts at 1 week after transplantation.

Optimizing Analysis Methods: Rapid and Accurate Determination of Cuaminosulfate Residues with LC-MS/MS Based on Box-Behnken Design Study.

In view of the defects in the previous detection of cuaminosulfate, which only focused on the analysis of copper ions, there is currently no analysis method available to determine the actual state of cuaminosulfate as chelated or bound. In order to investigate the dissipation and terminal residues in soil and watermelon of cuaminosulfate for food safety and environmental risk, a highly effective technique was developed to detect cuaminosulfate residues in watermelon and soil, and field experiments were conducted in China. After single-factor experiments, residual cuaminosulfate in samples was extracted by pure water, purified using a liquid-liquid approach combined with a dispersive solid-phase extraction, and detected by liquid chromatography tandem mass spectrometry (LC-MS/MS). The Box-Behnken design (BBD) study was used to find the optimal solutions for the time of liquid-liquid purification, the amount of extraction solvent, and the amounts of cleanup sorbents for the analytical method. The average recovery of the method was in the range of 80.0% to 101.1%, the average relative standard deviation (RSD) was 5.3-9.9%, and the detection limit was lower than 0.05 mg/kg. The BBD study not only improved the extraction rate of the method, but also saved time and was operated easily. The final residues of cuaminosulfate in watermelon at different sampling intervals were all lower than 0.05 mg/kg under field conditions. The cuaminosulfate in soils dissipated following exponential kinetics, with half-life values in the range of 9.39 to 12.58 days, which varied by different locations. Based on the validated method, food safety residues and soil residues can be determined rapidly and accurately.

Polymer Modification Strategy to Modulate Reaction Microenvironment for Enhanced CO2 Electroreduction to Ethylene.

Modulation of the microenvironment on the electrode surface is one of the effective means to improve the efficiency of electrocatalytic carbon dioxide reduction (eCO2 RR). To achieve high conversion rates, the phase boundary at the electrode surface should be finely controlled to overcome the limitation of CO2 solubility in the aqueous electrolyte. Herein, we developed a simple and efficient method to structure electrocatalyst with a superhydrophobic surface microenvironment by one-step co-electrodeposition of Cu and polytetrafluoroethylene (PTFE) on carbon paper. The super-hydrophobic Cu-based electrode displayed a high ethylene (C2 H4 ) selectivity with a Faraday efficiency (FE) of 67.3 % at -1.25 V vs. reversible hydrogen electrode (RHE) in an H-type cell, which is 2.5 times higher than a regular Cu electrode without PTFE. By using PTFE as a surface modifier, the activity of eCO2 RR is enhanced and water (proton) adsorption is inhibited. This strategy has the potential to be applied to other gas-conversion electrocatalysts.

Highly Stable Layered Coordination Polymer Electrocatalyst toward Efficient CO2 -to-CH4 Conversion.

Cu2+ -based materials, a class of promising catalysts for the electrocatalytic carbon dioxide reduction reaction (CO2 RR) to value-added chemicals, usually undergo inevitable and uncontrollable reorganization processes during the reaction, resulting in catalyst deactivation or the new active sites formation and bringing great challenges to exploring their structure-performance relationships. Herein, a facile strategy is reported for constructing Cu2+ and 3, 4-ethylenedioxythiophene (EDOT) coordination to stabilize Cu2+ ions to prepare a novel layered coordination polymer (CuPEDOT). CuPEDOT enables selective reduction of CO2 to CH4 with 62.7% Faradaic efficiency at the current density of 354 mA cm-2 in a flow cell, and the catalyst is stable for at least 15 h. In situ spectroscopic characterization and theoretical calculations reveal that CuPEDOT catalyst can maintain the Cu2+ -EDOT coordination structurally stable in CO2 RR and significantly promote the further hydrogenation of *CO intermediates, favoring the formation of CH4 instead of dimerization to C2 products. The strong coordination between EDOT and Cu2+ prevents the reduction of Cu2+ ions during CO2 RR. The finding of this work provides a new perspective on designing molecularly stable, highly active catalysts for CO2 RR.

CircMap4k2 reactivated by aneurysm plication alleviates residual cardiac remodeling after SVR by enhancing cardiomyocyte proliferation in post-MI mice.

INTRODUCTION: Surgical ventricular reconstruction (SVR) is an alternative therapeutic approach in patients with refractory heart failure (HF), but residual remodeling after SVR limits the improvement of HF. Recently, we reported that SVR may act as an environmental cue to reactivate endogenous proliferation of cardiomyocytes; however, it is unclear whether enhancing endogenous cardiomyocyte regeneration further improves HF after SVR. OBJECTIVES: We aimed to explore whether circular RNAs (circRNAs) would involved in SVR and their mechanisms. METHODS: Male C57BL/6 mice were subjected to myocardial infarction (MI) or sham surgery. Four weeks later, MI mice with a large ventricular aneurysm underwent SVR or a second open-chest operation only. Echocardiography and histological analysis were used to evaluate heart function, cardiac remodeling, and myocardial regeneration. Sequencing of circular RNAs, RNA immunoprecipitation, RNA pulldown, and luciferase reporter assay were used to explore the underlying mechanisms. RESULTS: SVR markedly attenuated cardiac remodeling and induced cardiomyocyte regeneration, as evidenced by positive staining of Ki-67, phospho-histone H3 (pH3), and Aurora B in the plication zone, but significant residual remodeling still existed in comparison with the sham group. Sequencing results showed that SVR altered the expression profile of cardiac circRNAs, and circMap4k2 was identified as the most upregulated one. After characterizing circMap4k2, we noted that overexpression of circMap4k2 significantly promoted proliferation of cardiomyocytes in cultured neonatal rat cardiomyocytes and silencing of circMap4k2 significantly inhibited it; similar results were obtained in SVR-treated MI mice but not in MI mice without SVR treatment. Residual cardiac remodeling after SVR was further attenuated by circMap4k2 overexpression. CircMap4k2 bound with miR-106a-3p and inhibited cardiomyocyte proliferation by targeting a downstream effector of the antizyme inhibitor 1 (Azin1) gene. CONCLUSIONS: CircMap4k2 acts as an environmental cue and targets the miR-106a-3p/Azin1 pathway to increase cardiac regeneration in the plication zone and attenuate residual remodeling after SVR.

Optimizing copper nanoparticles with a carbon shell for enhanced electrochemical CO2 reduction to ethanol.

The electrochemical reduction of carbon dioxide (CO2RR) holds great promise for sustainable energy utilization and combating global warming. However, progress has been impeded by challenges in developing stable electrocatalysts that can steer the reaction toward specific products. This study proposes a carbon shell coating protection strategy by an efficient and straightforward approach to prevent electrocatalyst reconstruction during the CO2RR. Utilizing a copper-based metal-organic framework as the precursor for the carbon shell, we synthesized carbon shell-coated electrocatalysts, denoted as Cu-x-y, through calcination in an N2 atmosphere (where x and y represent different calcination temperatures and atmospheres: N2, H2, and NH3). It was found that the faradaic efficiency of ethanol over the catalysts with a carbon shell could reach ∼67.8%. In addition, the catalyst could be stably used for more than 16 h, surpassing the performance of Cu-600-H2 and Cu-600-NH3. Control experiments and theoretical calculations revealed that the carbon shell and Cu-C bonds played a pivotal role in stabilizing the catalyst, tuning the electron environment around Cu atoms, and promoting the formation and coupling process of CO*, ultimately favoring the reaction pathway leading to ethanol formation. This carbon shell coating strategy is valuable for developing highly efficient and selective electrocatalysts for the CO2RR.

Genome-Wide Identification of PAP1 Direct Targets in Regulating Seed Anthocyanin Biosynthesis in Arabidopsis.

Anthocyanins are widespread water-soluble pigments in the plant kingdom. Anthocyanin accumulation is activated by the MYB-bHLH-WD40 (MBW) protein complex. In Arabidopsis, the R2R3-MYB transcription factor PAP1 activates anthocyanin biosynthesis. While prior research primarily focused on seedlings, seeds received limited attention. This study explores PAP1's genome-wide target genes in anthocyanin biosynthesis in seeds. Our findings confirm that PAP1 is a positive regulator of anthocyanin biosynthesis in Arabidopsis seeds. PAP1 significantly increased anthocyanin content in developing and mature seeds in Arabidopsis. Transcriptome analysis at 12 days after pollination reveals the upregulation of numerous genes involved in anthocyanin accumulation in 35S:PAP1 developing seeds. Chromatin immunoprecipitation and dual luciferase reporter assays demonstrate PAP1's direct promotion of ten key genes and indirect upregulation of TT8, TTG1, and eight key genes during seed maturation, thus enhancing seed anthocyanin accumulation. These findings enhance our understanding of PAP1's novel role in regulating anthocyanin accumulation in Arabidopsis seeds.

Ultra-fast synthesis of three-dimensional porous Cu/Zn heterostructures for enhanced carbon dioxide electroreduction.

The construction of metal hetero-interfaces has great potential in the application of electro-catalytic carbon dioxide reduction (ECR). Herein, we report a fast, efficient, and simple electrodeposition strategy for synthesizing three-dimensional (3D) porous Cu/Zn heterostructures using the hydrogen bubble template method. When the deposition was carried out at -1.0 A for 30 s, the obtained 3D porous Cu/Zn heterostructures on carbon paper (CP) demonstrated a nearly 100% CO faradaic efficiency (FE) with a high partial current density of 91.8 mA cm-2 at -2.1 V vs. Ag/Ag+ in the mixed electrolyte of ionic liquids/acetonitrile in an H-type cell. In particular, the partial current density of CO could reach 165.5 mA cm-2 and the FE of CO could remain as high as 94.3% at -2.5 V vs. Ag/Ag+. The current density is much higher than most reported to date in an H-type cell (Table S1). Experimental and density functional theory (DFT) calculations reveal that the outstanding electrocatalytic performance of the electrode can be ascribed to the formation of 3D porous Cu/Zn heterostructures, in which the porous and self-supported architecture facilitates diffusion and the Cu/Zn heterostructures can reduce the energy barrier for ECR to CO.

P-Band Intermediate States Mediate Electron Transfer at Confined Nanoscale.

In this Perspective, mainly based on the model of structural water molecules (SWs) as bright color emitters, we briefly summarize the development and theoretical elaboration of P-band intermediate state (PBIS) theory as well as its application in several typical catalytic redox reactions. In addition, with a simple equation (2∫ψ2σ1' + ∫ψ2σ2 + ∫ψ2π = 1), we clearly define how the interface states correlate with the three basic parameters of heterogeneous catalysis (conversion, selectivity, and stability), and what is the dynamic nature of catalytic active sites. Overall, the proposal of SW-dominated PBIS theory establishes an internal physical connection between the decay kinetics of excited electrons and the catalytic reaction kinetics and provides new insights into the physical origin of photoluminescence emission of low-dimensional quantum nanodots and the physical nature of nanoconfinement and nanoconfined catalysis.

Green carbon science: fundamental aspects.

Carbon energy has contributed to the creation of human civilization, and it can be considered that the configuration of the carbon energy system is one of the important laws that govern the operation of everything in the universe. The core of the carbon energy system is the opposition and unity of two aspects: oxidation and reduction. The operation of oxidation and reduction is based on the ternary elemental system composed of the three elements of carbon, hydrogen and oxygen. Its operation produces numerous reactions and reaction products. Ancient Chinese philosophy helps us to understand in depth the essence of green carbon science, to explore its scientific basis, and to identify the related platforms for technology development.

Pregnancy-induced physiological hypertrophic preconditioning attenuates pathological myocardial hypertrophy by activation of FoxO3a.

Previous studies show a woman's pregnancy is correlated with post-reproductive longevity, and nulliparity is associated with higher risk of incident heart failure, suggesting pregnancy likely exerts a cardioprotection. We previously reported a cardioprotective phenomenon termed myocardial hypertrophic preconditioning, but it is unknown whether pregnancy-induced physiological hypertrophic preconditioning (PHP) can also protect the heart against subsequent pathological hypertrophic stress. We aimed to clarify the phenomenon of PHP and its mechanisms. The pluripara mice whose pregnancy-induced physiological hypertrophy regressed and the nulliparous mice underwent angiotensin II (Ang II) infusion or transverse aortic constriction (TAC). Echocardiography, invasive left ventricular hemodynamic measurement and histological analysis were used to evaluate cardiac remodeling and function. Silencing or overexpression of Foxo3 by adeno-associated virus was used to investigate the role of FoxO3a involved in the antihypertrophic effect. Compared with nulliparous mice, pathological cardiac hypertrophy induced by Ang II infusion, or TAC was significantly attenuated and heart failure induced by TAC was markedly improved in mice with PHP. Activation of FoxO3a was significantly enhanced in the hearts of postpartum mice. FoxO3a inhibited myocardial hypertrophy by suppressing signaling pathway of phosphorylated glycogen synthase kinase-3ß (p-GSK3ß)/ß-catenin/Cyclin D1. Silencing or overexpression of Foxo3 attenuated or enhanced the anti-hypertrophic effect of PHP in mice with pathological stimulation. Our findings demonstrate that PHP confers resistance to subsequent hypertrophic stress and slows progression to heart failure through activation of FoxO3a/GSK3ß pathway.

Challenges and opportunities for engineering thermochemistry in carbon-neutralization technologies.

Engineering thermochemistry is the science and technology that studies, innovates, and engineers heat-induced or heat-driven thermochemical reactions and can potentially lead to reductions of five-plus billion tons of CO2 emissions effectively and economically.

Adjacent Copper Single Atoms Promote C-C Coupling in Electrochemical CO2 Reduction for the Efficient Conversion of Ethanol.

The electrochemical CO2 reduction reaction (CO2RR) using renewable electricity is one of the most promising strategies for reaching the goal of carbon neutrality. Multicarbonous (C2+) products have broad applications, and ethanol is a valuable chemical and fuel. Many Cu-based catalysts have been reported to be efficient for the electrocatalytic CO2RR to C2+ products, but they generally offer limited selectivity and current density toward ethanol. Herein, we proposed a silica-mediated hydrogen-bonded organic framework (HOF)-templated approach to preparing ultrahigh-density Cu single-atom catalysts (SACs) on thin-walled N-doped carbon nanotubes (TWN). The content of Cu in the catalysts prepared by this method could be up to 13.35 wt %. It was found that the catalysts showed outstanding performance for the electrochemical CO2RR to ethanol, and the Faradaic efficiency (FE) of ethanol increased with the increase in Cu-N3 site density. The FE of ethanol over the catalysts with 13.35 wt % Cu could reach ∼81.9% with a partial current density of 35.6 mA cm-2 using an H-type cell, which is the best result for electrochemical CO2RR to ethanol to date. In addition, the catalyst could be stably used for more than 25 h. Experimental and density functional theory (DFT) studies revealed that the adjacent Cu-N3 active sites (one Cu atom coordinates with three N) were the active sites for the reaction, and their high density was crucial for the high FE of ethanol because the adjacent Cu-N3 sites with a short distance could promote the C-C coupling synergistically.

Ternary Ionic-Liquid-Based Electrolyte Enables Efficient Electro-reduction of CO2 over Bulk Metal Electrodes.

Using bulk metals as catalysts to get high efficiency in electro-reduction of CO2 is ideal but challenging. Here, we report the coupling of bulk metal electrodes and a ternary ionic-liquid-based electrolyte, 1-butyl-3-methylimidazolium tetrafluoroborate/1-dodecyl-3-methylimidazolium tetrafluoroborate/MeCN to realize highly efficient electro-reduction of CO2 to CO. Over various bulk metal electrodes, the ternary electrolyte not only increases the current density but also suppresses the hydrogen evolution reaction to obtain a high Faradaic efficiency (FE) toward CO. FECO could maintain ∼100% over a wide potential range, and metal electrodes showed very high stability in the ternary electrolyte. It is demonstrated that the aggregation behavior of the ternary electrolyte and the arrangement of two kinds of IL cations with different chain lengths in the electrochemical double layer not only increase the wettability to electrode and CO2 adsorption but also extend the diffusion channel of H+, rendering the high current density and FECO.

Evaluating the Impact of Individual and Combined Toxicity of Imidacloprid, Cycloxaprid, and Tebuconazole on Daphnia magna.

The risks posed by chemicals in the environment are typically assessed on a substance-by-substance basis, often neglecting the effects of mixtures. This may lead to an underestimation of the actual risk. In our study, we investigated the effects of three commonly used pesticides-imidacloprid (IMI), cycloxaprid (CYC), and tebuconazole (TBZ)-both individually and in combination, using various biomarkers to assess their impact on daphnia. Our findings indicated that the order of toxicity, from highest to lowest, was TBZ, IMI, and CYC, as determined by acute toxicity as well as reproduction. The effects of the ITmix (IMI and TBZ) and CTmix (CYC and TBZ) combinations on immobilization and reproduction were evaluated by MIXTOX, revealing a higher risk of immobilization at low concentrations for ITmix. The effect on reproduction differed depending on the ration of pesticides in the mixture, with synergism observed, which may be caused mainly by IMI. However, CTmix showed antagonism for acute toxicity, with the effect on reproduction depending upon the composition of the mixture. The response surface also exhibited a switch between antagonism and synergism. Additionally, the pesticides extended the body length and inhibited the development period. The activities of superoxide dismutase (SOD) and catalase (CAT) content was also significantly induced at different dosage points in both the single and combination groups, indicating changes in the metabolic capabilities of detoxifying enzymes and target site sensitivity. These findings highlight the need for more attention to be focused on the effects of pesticide mixtures.

Evidence of solvent-mediated proton transfer during H2O2 activation in titanosilicate-catalyzed oxidation systems.

The catalytic performance of titanosilicates involving hydrogen peroxide (H2O2) as the oxidant is strongly influenced by the solvents. Until now, there is still a lack of a universal principle that can guide the choice of a solvent. Herein, the kinetics of H2O2 activation catalyzed by various titanosilicates in different solvents is investigated, and an isokinetic compensation effect is concluded. This indicates that the solvent participates in the H2O2 activation process for the formation of a Ti-OOH species. Additionally, the results of isotopically labeled infrared spectra preliminarily confirm that the solvent acts as the mediator to promote the proton transfer during the H2O2 activation process. The catalytic activities of a series of TS-1 catalysts toward 1-hexene epoxidation are compared, which include Ti(OSi)3OH species with a range of densities but a constant total Ti content. This reveals that the solvent effect is closely related to the Ti active sites of these TS-1 catalysts. Based on these results, a principle for the rational choice of solvent for this catalytic process is proposed. ROH is found to be the mediator for Ti(OSi)4 sites, and methanol, which has a strong proton-donating ability, is the best solvent for these sites. However, for the Ti(OSi)3OH sites, water (H2O) is the mediator, and a weaker hydrogen bonding between H2O molecules promotes proton transfer more effectively. The solvent influences the catalytic performance by perturbing the hydrogen bonds between the H2O molecules, and aprotic acetonitrile, which has a strong ability to break the hydrogen bonding network between H2O molecules, is the best solvent for Ti(OSi)3OH sites. This study provides experimental evidence that the solvent promotes the catalytic performance of titanosilicates by assisting the proton transfer during the catalytic H2O2 activation process, which will pave the way toward the rational choice of solvent for the titanosilicate-catalyzed oxidation systems.